Immax NEO LITE Smart 3x bulb LED E27 11W RGB + CCT color and white, dimmable, WiFi, Beacon, remote control

The Immax Neo SMART LED bulb provides a light color temperature of 2700K – 6500K + RGB (mixing of the basic colors red, green, blue and their combination) and a luminous flux of 1055 lumens, this value corresponds to a classic bulb with a power of 75W.

SMART WIFI system with BEACON support. This is wireless control using the Bluetooth protocol.
Using the remote control, you can CONTROL the light or bulb remotely:
It is not necessary to point the remote control at the product (range approx. 20m).
Up to 30 products can be controlled with one remote control.
There is no need to own a smart gateway (Bridge).

To be able to use a remote to control the light
controller, you must first add the fixture to the app! You can find more information in the instructions.

Technical specifications:
Protocol: Wi-Fi, Beacon
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: WiFi: 20dBm
Power consumption: 11W
Network standby power (Pnet): 0.4W
Socket: E27
Lamp body material: plastic
Light color: RGB + CCT (warm, natural and cool white)
Color temperature: 2700K-6500K
Luminous flux: 1055lm (in a 360° sphere)
Light beam angle: 240°
Input voltage: AC 230V
Average lifetime: 25,000 hours
Color rendering index:>80Ra
Dimensions: 6cm x 12.3cm
Corresponds to a classic light bulb: 75W
Number of switching cycles: 100,000
Instant lighting
Energy class (EEI): F
Power factor: >0.5
Dimming option: YES
Certificates: CE

07087-5
Smart remote control Immax NEO LITE Wifi TUYA, Bluetooth Beacon, 4 circuits range 25m

Technical parameters:
Material: Environmentally friendly PC material
White color
Power consumption: 3W (CR2032)
Degree of protection: IP20
This remote control can be used to control a luminaire or groups of luminaires at a distance of up to 25m in an open space.
Pairing groups of lights under function buttons A/B/C/D
Each luminaire with beacon support can be controlled by up to 3 remote controls.
The remote control can only be used for WiFi, Bluetooth, Sigmesh and tuya Beacon products.

Package contents: 3x bulb 07733L and 1x remote control 07087-5

If you cannot pair the Immax NEO bulb with the remote control or the Immax NEO smart gate, please reset the light. You can find how to properly reset the light on the website https://www.immaxneo.cz/podpora/faq/